The Impact of Foil Aluminum Bag Sealing Technology on Packaging Sealing Performance
Release time:
2025-11-04
Foil aluminum bags are widely used in the food, pharmaceutical, and electronics industries due to their excellent barrier properties, moisture resistance, and high-temperature resistance.
Foil aluminum bags are widely used in the food, pharmaceutical, and electronics industries due to their excellent barrier properties, moisture resistance, and high-temperature resistance. However, the sealing effect of foil aluminum bags depends not only on the material's inherent properties but also on the sealing technology. Sealing quality directly determines the packaging's airtightness, thus affecting the product's shelf life and safety.
Sealing temperature is a key factor affecting sealing performance. Foil aluminum bags are typically sealed using heat sealing. If the temperature is too low, the heat-sealed layer cannot fully fuse, resulting in a weak seal; conversely, if the temperature is too high, the material may over-melt or even break, affecting the overall appearance and strength. Therefore, sealing equipment needs precise temperature control based on the bag material's thickness and composite structure to ensure uniform and stable heat sealing.
Sealing pressure and time are also two important parameters determining sealing performance. Insufficient sealing pressure leads to a loose heat-sealed surface, creating tiny gaps that allow air or moisture to seep in; while excessive pressure may cause material layer displacement or deformation. The sealing time also needs to be properly controlled. Too short a time will result in insufficient heat transfer, while too long a time will affect production efficiency.
The cleanliness of the sealing area is another often overlooked detail. If powder, grease, or impurities remain in the sealing area, even if the sealing temperature and pressure are appropriate, poor sealing may occur. Therefore, the bag opening should be kept clean before sealing, and the heat sealing equipment should be maintained regularly to prevent aging of the heating elements or surface adhesion.
Precise control of the sealing technology for foil aluminum bags is the core of ensuring packaging airtightness. Only by achieving an optimal balance in sealing temperature, pressure, time, and cleanliness can the product be protected from external environmental influences during transportation and storage, extending its service life and enhancing the brand's quality image.
Related News
Address
Longkeng Xibu Industrial Area, Anbu Town, Chao’an District, Chaozhou, Guangdong, China